Two Component Liquid Rubber Molding Compound Liquid Silicone for Food Grade
Description
| Style NO. | 6250-10 |
| Raw material | Silicon |
| Curing type | Platinum vulcanization |
| Shelf life | 12 months |
| Payment term | L/C, T/T, Western Union, Paypal |
Typical Property
| 6250-10 | | / | Unit | Part - A | Part - B | | Appearance | / | translucent | translucent | | Viscosity | mPa.s | 600000 - 1200000 | | Shore A hardness | A | 10 ± 2 | | Density | g/cm3 | 1.07 ± 0.02 | | Resilience | % | ≥ 20 | | Tensile strength | Mpa | ≥ 1.5 | | Tear strength | KN / m | ≥ 5 | | Elongation | % | ≥ 750 | | Compression set | % | ≤ 25 | | Linear shrinkage rate | % | ≤ 0.5 | |
This data is a typical reference value and is for reference only.
Production Process
- Add raw material
- Stir and mix
- Sampling inspection
- (Viscosity detection, Hardness test, Tear resistance)
- Mass production
- Label
- Packing
- Transport
Physical properties | RTV mold silicone compound |
| Excellent fluid property |
| Mold release property |
| Thermal resistance |
| Stable mould dimension |
| Good physical property, high tear streangth |
| Simple operation |
| |
| Chemical properties | Vulcanizing time and operation time adjustable |
| Deeper vulcanizing available |
| Weather resistance |
| Chemical resistance |
| Suitable for products made from unsaturated polyester |
| Good durability and long processing life of the mould. |
Certificate
| RUI-HE® RH6250-10 Liquid silicone rubber obtained the following test certificate: |
| ISO9001: 2016 | FDA | RoHS | REACH | PAHS | SGS | MSDS |
Packing & Storage
Available in 20kg pails or 200kg drums.
Store in a cool, dry place out of direct sunlight, use it within 12 months from the day of manufacture.
FAQ
Q: How to get rid of the bubbles during my mold making?
A: After mixing liquid silicone with curing agent, please put the materials into vacuum machine to take off the bubbles
Q: How to get good silicone molds to use longer time?
A: The best way is:
a) Please choose the right liquid silicone according to your products.
b) Don't use any silicone oil in mold making, because it can make the silicone mold become too soft to use.
c) Silicone mold can be used longer after the whole silicone mould fully cured. So it's better to wait 24 hours after mold finished.
Product Tags:
|
|
Food Grade Liquid Rubber Molding Compound Chemical Resistance Simple Operation Images
|
